01-17-2002 08:23 AM - edited 02-21-2020 11:34 AM
I am using the software on Windows98 Second version, the VPN server is Cisco72XX, I wonder disable IPSEC in all transfer. I disable the checkbox of "Enable Transparent Tunnel ..." , but with debug mode of 72XX, still report IPSEC is enable. I think if carrier replace the VPN server like Uniphere, how can let client user use the client to dialin.
I just want to know how to disable IPSEC fully with Cisco VPN Client 3.5.
01-23-2002 02:02 PM
Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen
If anyone else in the forum has some advice, please reply to this thread.
Thank you for posting.
02-20-2002 05:17 PM
The VPN Client 3.5 is not supported yet on the Cisco IOS code, not till the 12.2.8T code. You could not disable the IPSec functionality on the Cisco VPN client 3.5. It is on by default and can't be disabled.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide