11-28-2003 11:28 AM - edited 02-21-2020 12:53 PM
I have a few customers who have the Linksys BEFW11S4 wireless router. They are able to authenticate through the wireless, but not traffic is passed. The user then plugs into the 4 port switch on the router and they authenticate and traffic begins to flow. I have had success with another customer who uses a Seimens DSL router with the Linksys WAP11 Access point and has had success using the Cisco VPN Client across the wireless. Does anyone know of the settings on the Linksys router that need to be changed to allow VPN Traffic to pass across the wireless network?
12-02-2003 11:43 AM
I had a similar problem that was fixed by updating the firmware on the router. Easy to download from the Linksys website with instructions.
12-03-2003 02:05 PM
Also, when you upgrade the firmware for the device ( make sure you get the right firmware update pre ver 2, or after ver 2 models arent compatible ). Then enable IPSEC pass-thru and or port forward tcp/udp 10000 to a specific internal IP... (TCP or UDP depending on your conectrator allow ruleset).
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide