Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Terminating SIP phones to a 3845 running 12.4.20T with 256M Flash and 512M Mem. Attempting to terminate close to 200 3911 SIP phones to this router. when the CREATE PROFILE is entered under voice register global, the cnf.xml files for the phones ar...
We have multiple 3845 running CCME. We have been hit by our audit committee that TFTP is open on these devices. I know that tftp has to be open for the Cisco phones to function, but is there a way to lock the router down globally where no network c...
I have a GRE tunnel built between a 1801 router and a 3725. Servers on both ends are running 802.3 encapsulation. If i do a sh ipx servers on the 1801, i see a full listing o of IPX devices throughout the network. The problem im having is, users si...
Has anyone had any success bonding multiple T1s on a 7304? I have a PA-MC-2T3+ and am attempting to bond 2 T1s together using the same configuration that i've had success with on my 3845s. When I place the T1s on the 7304 in the multilink group, I d...
Has anyone had any success when trying to bond multiple T1s in a 7304? I have a 7304 with a PA-MC-2T3+. I'm trying to bond 2 T1s up using the same config I have had success with on my 3845s. When bonded on the 7304, I get my EIGRP and BGP routing,...
Routing table looks fine. You can ping across the multilink interface. You can even telnet through the 7304, meaning, from another node you can telnet to a device that is connected to the far end of the multilink (3845) via a T1. Issue we saw was,...
Customer is using Netware 4.2. I have also psoted the sh ipx route and sh ipx server output from the 2801. It's really weird because they can see basically everything on the network. Even when I do a sh ipx server at another branch that sits behin...
Rick and Edison, thanks for your post. I am attaching the configurations. One thing that slipped my mind.....these 2 locations don't connect directly to each other. Each has a T1 back to a seperate 7304 and between the 2 7304s i have fiber. The 3...
Thank you for your reply. In this setup, our active directory that our customers/employees sign into is different than the VPN segment, i.e. i do not run AD on my vpn segment. So i believe if they "CTRL+ALT+DEL" it would only change their local pa...
I had a similar incident when I upgraded to ACS 3.3 and running vpn3000-4.1.2.Rel-k9.bin on my concentrators. Once I verified the RADIUS Server secret, i still had problems. I rebooted the VPN concentrator and everything started working.
