Client-Initiated L2TP Tunnels from a Win NT PC(LAC) using a router(LAC)

[ashraf.ali]

Hello Net Pros,

Could you please let me know whether we can configure a WIndows NT workstation as a L2TP Access Concentrator(LAC) and terminate L2TP Tunnels on to a Cisco router(LNS). This would be a client-initiated tunnel with the client (Win NT workstation) on a Ethernet. Would appreciate if you can provide a sample config on the same.

Best regards

Ashraf

[#2]

Hi Ashraf.

There are a couple of documents that might help. However they are based on Win2000. See if they help.

Configuring Cisco IOS and Windows 2000 Clients for L2TP Using Microsoft IAS:

http://www.cisco.com/warp/customer/116/l2tp_3886.html

Configuring L2TP over IPSec from a Windows 2000 or XP Client to a Cisco VPN 3000 Series Concentrator:

http://www.cisco.com/warp/public/471/vpn3k_l2tp.html