Command webvpn install svc not found

eriknilsson · ‎11-22-2011

Hi.

I have installed SSL VPN on my 1921 router and i can login with a user on the VPN page. However i cannot download the client because the package is not installed.

This is what i get when i try to install the client.

ROUTER(config)#webvpn install ?

% Unrecognized command

Any idea what could be wrong here? I have the client package on the flash memory.

Here is the rest of my SSL VPN config:

webvpn gateway gateway1

ip address xxxxxxxxxxxxxx port 443

ssl trustpoint SSL_VPN

inservice

!

no webvpn cef

!

webvpn context context1

secondary-color white

title-color #CCCC66

text-color black

!

policy group policy1

functions svc-enabled

svc address-pool "vpn_pool" netmask 255.255.255.0

svc default-domain "xxxxxxxx"

svc keep-client-installed

virtual-template 2

default-group-policy policy1

aaa authentication list vpn_auth

gateway gateway1

!

ssl authenticate verify all

inservice

eriknilsson · ‎11-22-2011

I should say that i have also updated the software on the router to the following:

C1900 Software (C1900-UNIVERSALK9-M), Version 15.2(2)T, RELEASE SOFTWARE (fc1)

Before the update of software the command was there.

Kind regards,

Erik

priscille · ‎11-23-2011

Hi,

I have a router cisco 2811 on wish I would like to configure an SSL VPN. please can somebody give me a step by step configuration lines?

thx

andrew.prince · ‎11-23-2011

Tetchou

Read the below config examples

http://www.cisco.com/en/US/customer/products/ps5854/prod_configuration_examples_list.html

HTH

andrew.prince · ‎11-23-2011

What version were you on before?

priscille · ‎11-23-2011

Hi Andrew,

Thank you for the prompt reply. But I din't succeed in opening the file you sent to me. Is it possible for you to download it and send it in mail box: tetchoupriscille@yahoo.com?

In fact, it is the first time for me to configure a router, I am in internship in an ISP compagny and that is one of my tasks.

please xcuz my english, I'm learning it.

thx 1's more.

priscille · ‎11-23-2011

finaly Andrew,

I reached the link and it is very helpful. I found what I was looking for.

thank you.

andrew.prince · ‎11-23-2011

No problem - glad it has helped.

eriknilsson · ‎11-23-2011

i was using the following file for booting:

c1900-universalk9-mz.SPA.151-1.T2.bin

Now im using:

c1900-universalk9-mz.SPA.152-2.T.bin

Kind regards,

priscille · ‎11-24-2011

hello,

to customise my SSL VPN portal these are the commands I typed, I took them form one of the user guide, Andrew gave me yersterday, but unfortunately, the router does not recongnise those commands. I don't know what's wrong.

- customise the SSL VPN Portal

(config)# webvpn context SecContext

(config-webvpn-context)# login-message “please enter your credentials”

(config-webvpn-context)# title “SecContext SSL VPN Service”

(config-webvpn-context)# secondary-color darkseagreen

(config-webvpn-context)# title-color #808080

(config-webvpn-context)# logo logohome.gif

(config-webvpn-context)# text-color white

(config-webvpn-context)# secondary-text-color black

config-webvpn-context)# exit

I also typed the commands that follows. but when I authenticate successfully, nothing appears that is I don't have any output. please do some one help me.

- access servers configuration

(config)# webvpn context SecContext

(config-webvpn-context)# url-list ListForClientlessUsers

(config-webvpn-url)# url-text “IntranetServer” url-value serverurl

(config-webvpn-url)# heading “ClientlessAccess”

(config)#ip name-server dnsserveraddress

- outlook server configuration

(config)# webvpn context SecContext

(config-webvpn-context)# url-list WebOutlook

(config-webvpn-context)# url-text “OutlookWebAccess” url-value serverurl

(config-webvpn-context)# heading “OutlookWebAccess"

- map the URL list above to the policy group

(config)# webvpn context SecContext

(config-webvpn-context)# policy group SecDefaultPolicy

(config-webvpn-policy)# url-list WebOutlook

(config-webvpn-policy)# url-list ListForClientlessUsers

(config-webvpn-policy)# hide-url-bar

eriknilsson · ‎11-24-2011

Do you mind creating your own thread regarding your issue, may speed things along for you if people can se your headline and your specific problem.

Kind regards,

Erik

priscille · ‎11-24-2011

I also can not downlaod the svc client because the package is not on the flash of the router.

Can the problem be the lack of license for vpn connexions?

regards,

Filippo Carzaniga · ‎09-11-2012

I have router 2901K9 with 15.2.T3 but I have not the command:

BPT-DE-01#sh ver

Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.2(3)T, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Compiled Fri 23-Mar-12 16:57 by prod_rel_team

ROM: System Bootstrap, Version 15.0(1r)M15, RELEASE SOFTWARE (fc1)

BPT-DE-01 uptime is 4 minutes

System returned to ROM by reload at 16:42:54 UTC Tue Sep 11 2012

System image file is "flash:c2900-universalk9-mz.SPA.152-3.T.bin"

Last reload type: Normal Reload

Last reload reason: Reload Command

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

BPT-DE-01#

BPT-DE-01#conf t

Enter configuration commands, one per line. End with CNTL/Z.

BPT-DE-01(config)#web

BPT-DE-01(config)#webvpn in

BPT-DE-01(config)#webvpn in?

% Unrecognized command

BPT-DE-01(config)#webvpn ?

cef Enable data process in CEF path

context Specify webvpn context

gateway Virtual Gateway configuration

sslvpn-vif SSLVPN Virtual Interface commands

Filippo Carzaniga · ‎09-24-2012

Find out solution: also if the command is not present, try anyway to do its!!

BPT-DE-01(config)#webvpn install svc flash:sslclient-win-1.1.4.176.pkg

SSLVPN Package SSL-VPN-Client (seq:1): installed successfully

CHRIS YEO · ‎11-04-2012

Guys,

You can use:

crypto vpn anyconnect flash:/anyconnect.pkg seq 1

Thanks!