Configuration of ASA for SSL VPN requiring user to enter both RSA SecurID token and AD password
I have been searching but unfortunately not successful in finding appropriate documentation on how to configure the ASA such that a user using AnyConnect SSL VPN client is prompted for their username + AD credentials + RSA SecurID token (all three must be presented/entered by the user) in separate fields before the VPN tunnel is established. On latest version of AnyConnect (3.1) and ASA version 9.x on 5500-X. Thanks for any pointers or guides.
I was helping some friends and they were trying to solve a scalable VPN issues, specially these days with the pandemic situation.
I recommended to implement ASA VPN Load-Balancing.
This will allow to keep 1 FQDN for all RA-VPN users an...
Purpose of this article is to share our experience during that Covid-19 period where we were able to successfully setup a VPN configuration for remote worker using Alcatel 8068S phones with FTD 2110 running 188.8.131.52.I would like to thank all of my colleagu...
If you have ever configured central web authentication with ISE you understand that it requires one to configure ACL that dictates what traffic is to be redirected vs. let through without redirection. You also understand that this ACL needs to be config...
Cisco Defense Orchestrator (CDO) is a cloud-based multi-device manager that can manage security products like the Adaptive Security Appliance (ASA), the Firepower Threat Defense next-generation firewall, and Meraki devices, to name a few.&nb...