08-10-2004 06:56 AM
Hi,
I have configured the Router and the CVPN 3005 with the procedure described in the doc Configuring the Cisco EZVPN Client with VPN 3000 Concentrator.
But when I enter : crypto ipsec client ezvpn xauth on the router, and give the user / password, then I have the error message in the Concentrator Event log :
User (User name) authenticated
but it is followed by the error :
Group (group name) User (user name)
Cannot obtain an IP address for remote peer.
So, in the User > Identity definition, I have entered an IP Address to be assigned, but it did not solve...
Many thanks if you can help me.
Patrice
08-10-2004 02:40 PM
I believe that you have set up the EzVPN on the router as Client Mode.
If you have assigned a static IP address for the user on the Concentrator, then make sure that under "Configuration | System | Address Management | Assignment", you have a check mark where it says: "Use Address from Authentication Server". Please let me know if it did the trick.
08-11-2004 10:43 PM
Hi,
I thank you for your answer which gave me an idea :
it was because I had not created an assigned pool.
It works now.
Cheers.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide