Configuring IPsec site-to-site VPN with Cisco 2911 router

[Tommy Svensson]

Hi.

I have a Cisco 2911 router and a Cisco RV 120W router and i would like to establish a VPN tunnel between theese two. I have defined the settings on the Cisco RV 120W router and i just want the Cisco 2911 to follow those. But im looking for a step-by-step guide for setting up a connection with Cisco IOS.

Regards Tommy Svensson

[andamani]

hi,

the following link gives you details of the L2L tunnel between IOS.

http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a0080223a59.shtml

Hope this helps.

Regards,

Anisha

P.S.: please mark this thread as answered if you feel your query is resolved.Do rate helpful posts.