11-18-2008 10:22 AM
Hello Frndz,
I need the help regarding configuring the PIX firewall I am posting my scenario as an attachment with complete description and requirements.
Frndz its very urgent
Thanking in Advance
11-19-2008 02:56 AM
Some comments
1) You cannot have a public ip address 192.168.x.x - this will not work on the internet.
2) You need to default gateway of the ISA to point to the PIX - not the other way around.
Other than that - ther rest of the config is simple. I suggest you use the below links for configuration examples:-
http://www.cisco.com/en/US/products/ps6120/prod_configuration_examples_list.html
HTH>
11-19-2008 06:00 AM
Awarded 2 pts
11-19-2008 06:01 AM
Thank you.
11-19-2008 03:06 PM
First of all thank for reply But sir I have used 192.168.1.1 just as an exmaple to explain I know that this type of addresses will not work on the internet Actually i dont know much about PIX that's why i choose cisco forum becoz i believe that i will get the best answers
11-20-2008 01:07 AM
OK - but my previous post is still correct, what you are trying to do is not difficult, you just need to understand what you want to do, plan test and deploy.
HTH>
11-20-2008 10:47 AM
Actually i am new to PIX firewall so for that I dont know how to configure Can you help me in this
11-20-2008 10:57 AM
Did you read the config examples I posted??
11-20-2008 11:01 AM
If you really do have trouble with this, and are struggling, email me @ andrew.prince@monster.com and I will help you with the config, trying to do it thru the forum will take to long.
HTH>
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide