cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
539
Views
0
Helpful
4
Replies

dmvpn tunnel connectivity issue

yose
Level 1
Level 1

looking for help on dmvpn tunnel connectivity issue

NBMA address of all spoke are pinged   smoothly without any drop 

tunnel is established correctly with all spokes 

however   there is a drop on traffic passing though tunnel ??? 

 

 

 

 

 

 

1 Accepted Solution

Accepted Solutions

Gopinath_Pigili
Spotlight
Spotlight

Please go through the link....it might helpful....

https://community.cisco.com/t5/vpn/packet-loss-via-dmvpn-tunnel-but-not-across-wan/td-p/1683925

Best regards
******* If This Helps, Please Rate *******

View solution in original post

4 Replies 4

Gopinath_Pigili
Spotlight
Spotlight

Please go through the link....it might helpful....

https://community.cisco.com/t5/vpn/packet-loss-via-dmvpn-tunnel-but-not-across-wan/td-p/1683925

Best regards
******* If This Helps, Please Rate *******

this can happened from 
1- MTU mismatch 
2- ISP issue  

the DMVPN connectivity issue is started while ISP upgrades the speed from 200mg to 500 mg ..  so if the cause is from ISP how can resolve the problem ?


@yose wrote:

the DMVPN connectivity issue is started while ISP upgrades the speed from 200mg to 500 mg ..  so if the cause is from ISP how can resolve the problem ?


Unfortunately I dont have answer' you need to contact ISP and describe issue and when it start.

MHM