cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1441
Views
0
Helpful
0
Replies

Double NAT VPN Scenario

Austin Rivet
Level 1
Level 1

Hello,

I have a situation where I need to setup a PPTP VPN tunnel through double-NAT. See the diagram for details. Note: The IP addresses used in the diagram are not the actual IP addresses used in the live network.

CS_VPN_Diagram_v1.0.png

On the remote site I have a Tomato router setup with PPTP. This is setup behind a residential gateway and it recieves a dynamic public IP from the ISP.

At the main office we have an ASA 5505 (base model) with a static public IP assigned to the outside interface. The inside interface of the ASA is configured with a NAT'ed IP address and is connected to a Tomato router just like the one on the remote site. The Tomato router is setup with NAT on the inside interface(s), effectively turning this into a double-NAT scenario.

My question is how do I configure the ASA so that the two Tomato routers can have PPTP connectivity?

Thanks,

Austin

0 Replies 0