10-04-2001 05:43 AM - edited 02-21-2020 11:26 AM
Greetings,
I have been trying to setup a perimter router with limited success connecting with Bellsouth's DSL service. I'm using a cisco 1720 router with C1700 Software (C1700-NO3SY7-M), Version 12.2(2)XQ1, EARLY DEPLOYMENT RELEA
SE SOFTWARE (fc1). Although my config has been functional it has been buggy...ie you can not telnet to it from the outside world. Furthermore, I cannot publish an internal web server using static nat. Has there been a problem with this IOS ?
Here is a config dump minus some numbers. Would appreciate any ideas?
Current configuration : 1624 bytes
!
version 12.2
no parser cache
no service single-slot-reload-enable
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname DSL-GATE
!
logging rate-limit console 10 except errors
enable password gateface
!
memory-size iomem 20
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
ip subnet-zero
!
!
no ip telnet comport enable
!
ip audit notify log
ip audit po max-events 100
no ip dhcp-client network-discovery
vpdn enable
!
vpdn-group pppoe
request-dialin
protocol pppoe
!
!
!
!
interface ATM0
no ip address
atm vc-per-vp 256
no atm ilmi-keepalive
bundle-enable
dsl operating-mode auto
!
interface ATM0.1 point-to-point
pvc 8/35
pppoe-client dial-pool-number 1
!
!
interface FastEthernet0
ip address 192.168.1.1 255.255.255.0
ip mtu 1492
ip nat inside
speed auto
!
interface Dialer1
ip address negotiate
ip nat outside
encapsulation ppp
ip mtu 1492
dialer pool 1
dialer-group 1
ppp authentication " " callin
ppp chap hostname " "
ppp chap password 7 " "
ppp pap sent-username " " password 7 " "
!
ip nat inside source list 1 interface Dialer1 overload
ip nat inside source static 192.168.1.254 "public ip" extendable
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1
no ip http server
!
access-list 1 permit 192.168.1.0 0.0.0.255
!
!
!
line con 0
logging synchronous
line aux 0
line vty 0 4
password " "
login
transport input pad udptn telnet rlogin
line vty 5 15
password " "
login
transport input pad udptn telnet rlogin
!
end
10-10-2001 07:11 AM
I didnt see anything obvious on bug tool kit. You could try searching with your exact version.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide