03-31-2003 10:05 AM - edited 02-21-2020 12:26 PM
I have a non-Cisco gateway using a dynamic IP address trying to connect the a VPN 3005. I have tested it to a PIX and it works. But when it attempts to connect to the 3005 the log says
No Group found matching 10.1.1.1 for Pre-shared key peer 10.1.1.1
That tells me it is not even trying to use the base group - any ideas???
03-31-2003 01:23 PM
Hi,
it should work, why its not trying to authenticate against BASE_GROUP, double check your config.
Thanks,
Afaq
04-01-2003 05:21 AM
I had to use main mode - and then it worked.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide