Dynamic VPN from SA520 to PIX with static IP

[mhassandiyar]

can I establish site-to-site VPN from SA520 from my remote office (DSL thomson with dynamic IP) to my main office that have PIX 515 with Static IP.

[Federico Coto Fajardo]

Hi,

Yes.

You can establish a dynamic-to-static site-to-site VPN tunnel between both ends.

Another option would be an EzVPN tunnel.

Federico.

[mhassandiyar]

Thanks Fedrico,

but i just wanted to make sure that this model SA520 will initiate the dynamic VPN with the PIX, because friend of mian told me this model will not do the job you had to use ASA5505 for tht job.

So are you sure it will work?

looking forward for your kind reply.

Kind Regards.

[Federico Coto Fajardo]

You're right.

The SA 500 Series does not currently support Easy VPN capabilities..

But, if you configure a regular Site-to-Site IPsec tunnel on the SA520 side, then you can configure a Dynamic-to-Static tunnel on the PIX side to create the Site-to-Site IPsec tunnel.

If you use an ASA 5505, then you can do either way.

Federico.