Easy VPN Hardware instead of Easy VPN software

[abdulwalicisco7]

Hi every body

I need  configuration  for VPN  in Cisco routers to connect 30 branches to main office using Internet links

connection in Main office have a static Public IP but the  problem is the remote Branches  have dynamic Public   IP which is changing every time when restarting the ADSL  router  , and I can't buy static Public IP for each branch to make Point -To-Point VPN, and I do not want to use Easy VPN software in remote branches ,what i want is  using the router in remote  branches instead of  easy VPN software

please , what is the configuration command that  make Cisco route work as cisco easy VPN Software .

Thanks

[Federico Coto Fajardo · Accepted solution]

Hi,

Instead of having to use the IPsec software client on the machines you can use an IOS router or ASA as an EzVPN Hardware client.

Only certain models can be used as clients for example IOS 831s, 871s (small ones) or ASAs 5505.

A configuration example:

http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6586/ps6635/ps6659/prod_white_paper0900aecd80313bd0.pdf

Federico.

[abdulwalicisco7]

thank you

[jan.nielsen]

http://www.cisco.com/en/US/partner/tech/tk583/tk372/technologies_configuration_example09186a0080808395.shtml

[abdulwalicisco7]

Thank you