Dear allI need your advice about NAC systemsI have two options for NAC one is from juniper (IC-4500) and second is from Cisco , and all our network environment switches and routers is cisco . Is there any advantage or disadvantage if I us...
Dear allplease I want to copy image to router 2811 flash but there is problemand when I try to fromat the flash an error as the following show :Router#format flash:Format operation may take a while. Continue? [confirm]Format operation will de...
Hi every bodyI need configuration for VPN in Cisco routers to connect 30 branches to main office using Internet linksconnection in Main office have a static Public IP but the problem is the remote Branches have dynamic Public IP which is chang...
Hello I have problem with ISDN Connection, I use ISDN configuration in cisco Router using Dial in demand command , the problem is the ISDN link doesn’t automatic activate to UP status when the client and host connected to router want to use ne...
Dear allThank you for help, after downloading image file with size 16MB the flash worked will and the boot was normaly .the flash card is 64 MB the problem was when I used Image file 24MB or 45MB , I Use another Flash and same problem .now i...
Dear Raza;this is the boot show*** System received a Software forced crash ***signal= 0x17, code= 0x5, context= 0x80014e20PC = 0x8000f0d4, Cause = 0x20, Status Reg = 0x3040a803c2811 platform with 262144 Kbytes of main memoryMain memory is configured ...
