EasyVPN cannot Connect

trgrassi55 · ‎12-28-2011

Just configured EasyVPN using CCP and also I am very new to VPN

On my Windows Vista laptop I went into Network and Sharing and create a VPN Connection

when trying to connect to my VPN I get Error 800 Unable to establish the VPN connection. The VPN server my be unreachable or security parameters may not be configured properly for this connection when I diagnose the problem I get ip address is not set up to establish a connection on port "pptp" with this computer

The following are from the event log on the laptop

Log Name: Application

Source: RasClient

Date: 12/28/2011 9:46:48 AM

Event ID: 20227

Task Category: None

Level: Error

Keywords: Classic

User: N/A

Computer: computer2.my.network.com

Description:

CoId={94623C2F-773C-4DCD-9837-1AEF36646461}: The user DOM\auser01 dialed a connection named VPN Connection which has failed. The error code returned on failure is 800.

Event Xml:

<Event xmlns="

http://schemas.microsoft.com/win/2004/08/events/event

">

<Channel>Application</Channel>

<Computer>computer2.my.network.com</Computer>

</System>

<Data>DOM\auser01</Data>

<Data>VPN Connection</Data>

</EventData>

Log Name:      System
Source:        Microsoft-Windows-RasSstp
Date:          12/28/2011 9:45:16 AM
Event ID:      1
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      computer2.my.network.com
Description:
The initial Secure Socket Tunneling Protocol request could not be successfully sent to the server. This can be due to network connectivity issues or certificate (trust) issues. The detailed error message is provided below. Correct the problem and try again.

A certificate chain processed, but terminated in a root certificate which is not trusted by the trust provider.

Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-RasSstp" Guid="{6c260f2c-049a-43d8-bf4d-d350a4e6611a}" EventSourceName="RasSstp" />
    <EventID Qualifiers="0">1</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2011-12-28T14:45:16.000Z" />
    <EventRecordID>103897</EventRecordID>
    <Correlation />
    <Execution ProcessID="0" ThreadID="0" />
    <Channel>System</Channel>
    <Computer>computer2.my.network.com</Computer>
    <Security />
</System>
<EventData>
    <Data Name="Error Message">A certificate chain processed, but terminated in a root certificate which is not trusted by the trust provider.
</Data>
</EventData>
</Event>

My current config I highlighted some areas of the config that I am not sure about

Do I have the correct interface defined?

Am I missing anything else?
-----------------------------------------------------------------------
Cisco Router and Security Device Manager (SDM) is installed on this device.
This feature requires the one-time use of the username "cisco"
with the password "cisco". The default username and password have a privilege le
vel of 15.

Please change these publicly known initial credentials using SDM or the IOS CLI.

Here are the Cisco IOS commands.

username <myuser> privilege 15 secret 0 <mypassword>
no username cisco

Replace <myuser> and <mypassword> with the username and password you want to use
.

For more information about SDM please follow the instructions in the QUICK START

GUIDE for your router or go to http://www.cisco.com/go/sdm
-----------------------------------------------------------------------

User Access Verification

Username: netman
Password:

MyRouter#show config
Using 5935 out of 131072 bytes
!
! Last configuration change at 10:17:09 EST Tue Dec 27 2011 by netman
! NVRAM config last updated at 10:17:10 EST Tue Dec 27 2011 by netman
!
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname MyRouter
!
boot-start-marker
boot-end-marker
!
logging buffered 51200 warnings
enable secret 5 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/
!
aaa new-model
!
!
aaa group server radius sdm-vpn-server-group-1
server 192.168.69.15 auth-port 1645 acct-port 1646
!
aaa authentication login default local
aaa authentication login ciscocp_vpn_xauth_ml_1 group sdm-vpn-server-group-1 loc
al
aaa authorization exec default local
aaa authorization network ciscocp_vpn_group_ml_1 group sdm-vpn-server-group-1 lo
cal
!
aaa session-id common
!
resource policy
!
clock timezone EST -5
clock summer-time edt recurring
ip subnet-zero
no ip dhcp use vrf connected
ip dhcp excluded-address 10.10.10.1
!
ip dhcp pool sdm-pool
   import all
   network 10.10.10.0 255.255.255.248
   default-router 10.10.10.1
   lease 0 2
!
!
ip cef
ip domain name TGCSNET.COM
ip name-server 71.242.0.12
ip name-server 71.250.0.12
ip name-server 4.2.2.2
!
!
crypto pki trustpoint TP-self-signed-1164042433
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1164042433
revocation-check none
rsakeypair TP-self-signed-1164042433
!
!
crypto pki certificate chain TP-self-signed-1164042433
certificate self-signed 01 nvram:IOS-Self-Sig#3302.cer
username netman privilege 15 secret 5 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
username mynet privilege 15 secret 5 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
!
!
!
crypto isakmp policy 1
encr 3des
authentication pre-share
group 2
!
crypto isakmp client configuration group TGCSVPN
key ourvpn
dns 192.168.69.10 192.168.69.15
wins 192.168.69.10 192.168.69.15
domain our
pool SDM_POOL_1
max-users 10
netmask 255.255.255.0
crypto isakmp profile ciscocp-ike-profile-1
match identity group WGP-1
   match identity group WGP-2
   match identity group ACCTG
   match identity group CSVC
   match identity group TGCSVPN
   client authentication list ciscocp_vpn_xauth_ml_1
   isakmp authorization list ciscocp_vpn_group_ml_1
   client configuration address respond
   virtual-template 1
!
!
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
!
crypto ipsec profile CiscoCP_Profile1
set transform-set ESP-3DES-SHA
set isakmp-profile ciscocp-ike-profile-1
!
!
bridge irb
!
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface FastEthernet4
description $ETH-WAN$
ip address 72.88.223.20 255.255.255.0
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
!
interface Virtual-Template1 type tunnel
ip unnumbered FastEthernet4
tunnel mode ipsec ipv4
tunnel protection ipsec profile CiscoCP_Profile1
!
interface Dot11Radio0
no ip address
!
encryption vlan 1 mode ciphers tkip
!
ssid 010659120255
!
ssid TGCSNET
    vlan 1
    authentication open
    authentication key-management wpa
    guest-mode
    wpa-psk ascii 0 010659120255000000
!
speed basic-1.0 2.0 5.5 6.0 9.0 11.0 12.0 18.0 24.0 36.0 48.0 54.0
channel 2437
station-role root
!
interface Dot11Radio0.1
encapsulation dot1Q 1 native
no snmp trap link-status
no cdp enable
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
!
interface Vlan1
description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$
no ip address
ip virtual-reassembly
ip tcp adjust-mss 1452
bridge-group 1
bridge-group 1 spanning-disabled
!
interface BVI1
ip address 192.168.69.1 255.255.255.0
ip nat inside
ip virtual-reassembly
!
ip local pool SDM_POOL_1 192.168.70.75 192.168.70.99
ip classless
ip route 0.0.0.0 0.0.0.0 72.88.223.1
!
ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 600 life 86400 requests 10000
ip nat inside source list 110 interface FastEthernet4 overload
ip nat inside source static tcp 192.168.69.26 8080 interface FastEthernet4 8080
ip nat inside source static tcp 192.168.69.26 25 interface FastEthernet4 25
ip nat inside source static tcp 192.168.69.15 80 interface FastEthernet4 80
ip nat inside source static tcp 192.168.69.15 21 interface FastEthernet4 21
ip nat inside source static tcp 192.168.69.15 5900 interface FastEthernet4 5900
ip nat inside source static tcp 192.168.69.26 443 interface FastEthernet4 443
!
ip access-list extended denyDHCP
deny   udp any any eq bootpc
deny   udp any any eq bootps
permit ip any any
!
ip radius source-interface BVI1
access-list 23 permit 192.168.69.0 0.0.0.255
access-list 110 permit ip 192.168.69.0 0.0.0.255 any
no cdp run
radius-server host 192.168.69.15 auth-port 1645 acct-port 1646
!
control-plane
!
bridge 1 route ip
banner login ^C
-----------------------------------------------------------------------
Cisco Router and Security Device Manager (SDM) is installed on this device.
This feature requires the one-time use of the username "cisco"
with the password "cisco". The default username and password have a privilege le
vel of 15.

Please change these publicly known initial credentials using SDM or the IOS CLI.

Here are the Cisco IOS commands.

username <myuser> privilege 15 secret 0 <mypassword>
no username cisco

Replace <myuser> and <mypassword> with the username and password you want to use
.

For more information about SDM please follow the instructions in the QUICK START

GUIDE for your router or go to http://www.cisco.com/go/sdm
-----------------------------------------------------------------------
^C
!
line con 0
no modem enable
line aux 0
line vty 0 4
access-class 23 in
transport input telnet ssh
!
scheduler max-task-time 5000
ntp clock-period 17175148
ntp server 141.165.5.137
end

MyRouter#

What commands can I run on the router to check status of my VPN???

Any ideas?

Thanks

Tom