I have the gateway/tunnels established and they connect, but I'm unable to ping between the two networks.
Network 1: 192.168.0.0/24
Network 2: 192.168.1.0/24
The Ubee log only shows the tunnels established and no errors.
Cisco log shows this:
| Fri Jul 10 09:37:29 2015 | IKE Phase 1 Negotiation Complete <Local Gateway>==><Remote Gateway> |
| Fri Jul 10 09:37:29 2015 | IKE Phase 1 Negotiation Started <Local Gateway>==><Remote Gateway> |
| Fri Jul 10 09:36:13 2015 | IKE Phase 2 Negotiation Complete <Local Gateway>==><Remote Gateway> |
| Fri Jul 10 09:36:13 2015 | IpSec Security Associations Loaded <Local Gateway>==><Remote Gateway> |
| Fri Jul 10 09:36:12 2015 | IKE Phase 2 Negotiation Started <Local Gateway>==><Remote Gateway> |
| Fri Jul 10 08:36:22 2015 | IKE Phase 2 Negotiation Complete <Local Gateway>==><Remote Gateway> |
| Fri Jul 10 08:36:22 2015 | IpSec Security Associations Loaded <Local Gateway>==><Remote Gateway> |
| Fri Jul 10 08:36:21 2015 | IKE Phase 2 Negotiation Started <Local Gateway>==><Remote Gateway> |
| Fri Jul 10 07:36:31 2015 | IKE Phase 2 Negotiation Complete <Local Gateway>==><Remote Gateway> |
| Fri Jul 10 07:36:31 2015 | IpSec Security Associations Loaded <Local Gateway>==><Remote Gateway> |
| Fri Jul 10 07:36:31 2015 | IKE Phase 2 Negotiation Started <Local Gateway>==><Remote Gateway> |
| Fri Jul 10 06:36:40 2015 | IKE Phase 2 Negotiation Complete <Local Gateway>==><Remote Gateway> |
| Fri Jul 10 06:36:40 2015 | IpSec Security Associations Loaded <Local Gateway>==><Remote Gateway> |
| Fri Jul 10 06:36:40 2015 | IKE Phase 2 Negotiation Started <Local Gateway>==><Remote Gateway> |
| Fri Jul 10 05:36:50 2015 | IKE Phase 2 Negotiation Complete <Local Gateway>==><Remote Gateway> |
| Fri Jul 10 05:36:50 2015 | IpSec Security Associations Loaded <Local Gateway>==><Remote Gateway> |
| Fri Jul 10 05:36:49 2015 | IKE Phase 2 Negotiation Started <Local Gateway>==><Remote Gateway> |
| Fri Jul 10 04:36:59 2015 | IKE Phase 2 Negotiation Complete <Local Gateway>==><Remote Gateway> |
| Fri Jul 10 04:36:59 2015 | IpSec Security Associations Loaded <Local Gateway>==><Remote Gateway> |
| Fri Jul 10 04:36:59 2015 | Failed ESP packet 192.168.1.22==>192.168.0.12 (spi=00 00 00 00, seq=00 00 00 00) |
| Fri Jul 10 04:36:59 2015 | PacketEncapsulate failed with error Bad Sequence Number |
(IP information removed for security reasons)
Any idea on that error? I've triple checked IP/subnet mask info and can't find any clue on this error.
I see no option for NAT Traversal or Advanced routing in the Cisco device, I thought maybe my problem would lie there.
