Firepower 1140 VPN tunneled static route

[dpditstaff]

We are currently running VPN Anyconnect sessions on a soon to be decommissioned ASA which has a tunneled static route for the VPN clients.  As we transition to a Firepower 1140, we need to add the same functionality by tunneling the static route for the VPN clients.  What is the CLI command for this feature or is it possible in the FDM GUI?

Thanks

[Rob Ingram]

@dpditstaff unfortunately you cannot configure a tunnelled static route if you are using FDM. You cannot configure this with the CLI either.

[dpditstaff]

Thank you for the quick response.

[MHM Cisco World]

MHM

[dpditstaff]

Static default route.

[MHM Cisco World]

MHM

[Rob Ingram]

@MHM Cisco World @dpditstaff is referring to a "tunnelled" static route for the VPN traffic to be routed via a different default route.

[MHM Cisco World]

Defualt Gw tunneled 

It available in fmc 

If you use fdm then try use flexconfig and add this feature.

MHM