07-21-2008 08:41 PM
my FWSM module:
Hardware: WS-SVC-FWM-1, 1024 MB RAM, CPU Pentium III 1000 MHz
cpu utilization is very high ctx1 is taking is around 60 %
0.3% 0.3% 0.3% admin
58.0% 58.1% 58.4% ctx1
07-22-2008 02:04 PM
Syslogs and Application Inspections are the most heavy processes on the FWSM.
Try lowering the sys log levels to 3/4 and removing the inspections that you do not need.
Syed Iftekhar Ahmed
07-23-2008 02:23 AM
We had already disabled the unwanted . Apart from this we had also tried disabling the syslog but still the CPU utilization is not going down
still no luck
Can you please provide me some clue on this
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide