07-12-2012 04:26 PM
Can someone take a quick look at this config and let me know why the L2TP vpn is not working? I have been banging my head with no results.
Thanks so much if anyone can help me.
ASA Version 8.2(5)
!
hostname companyASA
domain-name *****.com
enable password encrypted
passwd encrypted
names
name 192.168.1.0 AppletonData description Appleton Data
name 172.16.0.0 AppletonVoice description Appleton Voice
name 172.16.16.0 Watertown description Watertown
name 10.0.0.0 anyInside description anyInside
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
switchport access vlan 209
!
interface Ethernet0/7
switchport access vlan 209
!
interface Vlan1
nameif inside
security-level 100
ip address 10.76.3.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
ip address 12.XXX.XXX.XXX 255.255.255.0
!
interface Vlan209
nameif IPOffice
security-level 50
ip address 10.10.109.1 255.255.255.0
!
ftp mode passive
dns domain-lookup outside
dns server-group DefaultDNS
name-server 8.8.8.8
domain-name *****.com
object-group network obj_any
object-group network Any10Address
description Data and Phone Networks Combined
object-group network AppletonData
description Appleton Data Network
object-group network AppletonPhone
description Appleton Phone Network
object-group network NETWORK_OBJ_10.76.3.0_24
object-group network Watertown
description Watertown Network
object-group network NETWORK_OBJ_10.10.109.0_24
object-group network Internal-Subnet
access-list Split-Tunnel-ACL standard permit 10.76.3.0 255.255.255.0
access-list outside_access_in extended permit icmp any any inactive
access-list outside_1_cryptomap extended permit ip 10.76.3.0 255.255.255.0 AppletonData 255.255.255.0
access-list inside_nat0_outbound extended permit ip 10.76.3.0 255.255.255.0 AppletonData 255.255.255.0
access-list inside_nat0_outbound extended permit ip anyInside 255.0.0.0 Watertown 255.255.255.0
access-list inside_nat0_outbound extended permit ip 10.76.3.0 255.255.255.0 192.168.50.0 255.255.255.192
access-list IPOffice_nat0_outbound extended permit ip 10.10.109.0 255.255.255.0 AppletonVoice 255.255.255.0
access-list IPOffice_nat0_outbound extended permit ip anyInside 255.0.0.0 Watertown 255.255.255.0
access-list outside_2_cryptomap extended permit ip 10.10.109.0 255.255.255.0 AppletonVoice 255.255.255.0
access-list outside_3_cryptomap extended permit ip anyInside 255.0.0.0 Watertown 255.255.255.0
access-list DefaultRAGroup_splitTunnelAcl standard permit 10.76.3.0 255.255.255.0
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
mtu IPOffice 1500
ip local pool VPN_Pool 192.168.50.10-192.168.50.50 mask 255.255.255.0
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 101 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 101 0.0.0.0 0.0.0.0
nat (IPOffice) 0 access-list IPOffice_nat0_outbound
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 12.133.127.169 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication ssh console LOCAL
http server enable
http 10.76.3.0 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 outside
no snmp-server location
no snmp-server contact
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac
crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport
crypto ipsec transform-set l2tp-transform esp-3des esp-sha-hmac
crypto ipsec transform-set l2tp-transform mode transport
crypto ipsec transform-set vpn-transform esp-aes-256 esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map dyn-map 10 set transform-set l2tp-transform vpn-transform
crypto dynamic-map dyn-map 10 set reverse-route
crypto map outside_map 1 set pfs
crypto map outside_map 1 set peer 99.6XX.XXX.XXX
crypto map outside_map 2 set pfs
crypto map outside_map 2 set peer 99.1XX.XXX.XXX
crypto map outside_map 3 set pfs
crypto map outside_map 3 set peer 24.XXX.XXX.XXX
crypto map L2TP-VPN-MAP 1 match address outside_1_cryptomap
crypto map L2TP-VPN-MAP 1 set pfs
crypto map L2TP-VPN-MAP 1 set peer 99.6XX.XXX.XXX
crypto map L2TP-VPN-MAP 1 set transform-set ESP-3DES-SHA
crypto map L2TP-VPN-MAP 2 match address outside_2_cryptomap
crypto map L2TP-VPN-MAP 2 set pfs
crypto map L2TP-VPN-MAP 2 set peer 99.1XX.XXX.XXX
crypto map L2TP-VPN-MAP 2 set transform-set ESP-3DES-SHA
crypto map L2TP-VPN-MAP 3 match address outside_3_cryptomap
crypto map L2TP-VPN-MAP 3 set pfs
crypto map L2TP-VPN-MAP 3 set peer 24.XXX.XXX.XXX
crypto map L2TP-VPN-MAP 3 set transform-set ESP-3DES-SHA
crypto map vpn-map 10 ipsec-isakmp dynamic dyn-map
crypto map vpn-map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh 0.0.0.0 0.0.0.0 outside
ssh timeout 5
console timeout 0
dhcpd auto_config outside
!
dhcpd address 10.76.3.5-10.76.3.254 inside
dhcpd dns 8.8.8.8 interface inside
dhcpd domain *****.com interface inside
!
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy DefaultRAGroup internal
group-policy DefaultRAGroup attributes
dns-server value 8.8.8.8
vpn-tunnel-protocol l2tp-ipsec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value DefaultRAGroup_splitTunnelAcl
default-domain value *****.com
group-policy DfltGrpPolicy attributes
vpn-tunnel-protocol l2tp-ipsec
group-policy GroupPolicy_99.6XX.XXX.XXX internal
group-policy GroupPolicy_99.6XX.XXX.XXX attributes
vpn-tunnel-protocol IPSec
group-policy GroupPolicy_24.XXX.XXX.XXX internal
group-policy GroupPolicy_24.XXX.XXX.XXX attributes
vpn-tunnel-protocol IPSec
group-policy GroupPolicy_99.1XX.XXX.XXX internal
group-policy GroupPolicy_99.1XX.XXX.XXX attributes
vpn-tunnel-protocol IPSec
group-policy vpn-policy internal
group-policy vpn-policy attributes
vpn-tunnel-protocol IPSec
username support password encrypted privilege 15
username lmk1 password nt-encrypted
username admin password encrypted privilege 15
username drm1 password nt-encrypted
username jms1 password nt-encrypted
username tcb1 password nt-encrypted
username jmb1 password nt-encrypted
username enm1 password nt-encrypted
username jason password nt-encrypted
username amw1 password nt-encrypted
username alp1 password nt-encrypted
username lab1 password nt-encrypted
tunnel-group DefaultL2LGroup ipsec-attributes
isakmp keepalive threshold 15 retry 2
tunnel-group DefaultRAGroup general-attributes
address-pool VPN_Pool
tunnel-group DefaultRAGroup ipsec-attributes
pre-shared-key *****
isakmp keepalive disable
tunnel-group DefaultRAGroup ppp-attributes
authentication pap
no authentication chap
authentication ms-chap-v2
tunnel-group 99.6XX.XXX.XXX type ipsec-l2l
tunnel-group 99.6XX.XXX.XXX general-attributes
default-group-policy GroupPolicy_99.6XX.XXX.XXX
tunnel-group 99.6XX.XXX.XXX ipsec-attributes
pre-shared-key *****
tunnel-group 99.1XX.XXX.XXX type ipsec-l2l
tunnel-group 99.1XX.XXX.XXX general-attributes
default-group-policy GroupPolicy_99.1XX.XXX.XXX
tunnel-group 99.1XX.XXX.XXX ipsec-attributes
pre-shared-key *****
tunnel-group 24.XXX.XXX.XXX type ipsec-l2l
tunnel-group 24.XXX.XXX.XXX general-attributes
default-group-policy GroupPolicy_24.XXX.XXX.XXX
tunnel-group 24.XXX.XXX.XXX ipsec-attributes
pre-shared-key *****
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
!
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide