Help with Client VPN to 1720 VPN Router for network access

[evanderb]

I have a 1720 VPN router that I configured for remote users to connect to using the VPN client that is used when connecting to IOS based VPN's. I also have a LAN-to-LAN tunnel set up to that 1720 from corporate. TAC has told me that the users who VPN into the 1720 cannot access any of the networks on the other side of the LAN-to-LAN tunnel at corporate. Does anyone know if this is possible?

[cjacinto]

It should be possible, since your are using routers for Lan to Lan. It would not be if you are using PIX on the central site. Anyway there is a sample config of this on:

http://www.cisco.com/warp/customer/707/oddconfig.html