cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
332
Views
5
Helpful
4
Replies

Help with Remote Access VPN

marioderosa2008
Level 1
Level 1

Hi all,

I need some help trouleshooting an issue with a new remote Access VPN that I have set up on my ASA ver 7.2.

It has a base license on it. I have setup my Remote Access VPN as an IPSec VPN with Certificate authentication.

A client can connect fine and get full access the first time he/she connects. However, if you then disconnect that client and then try and reconnect, the client connects and authenticates fine, but there is no IP connectivity at all.

I have attached a text document containing the config of the ASA 5505 that I am using for testing purposes. The idea is to roll his out on a 5540 at least...

Any help appreciated thanks!

Mario

4 Replies 4

marioderosa2008
Level 1
Level 1

I have resolved this now by enabling NAT-Traversal on the ASA which is something that I missed.

Thanks!

Mario

Hi Mario,

I am glad to see you found the answer

Here is a good link for your reference:

ASA IPsec and IKE debugs (IKEv1 Main Mode) Troubleshooting TechNote

HTH.

Portu.

Please rate any helpful posts.

thanks very much

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: