09-09-2021 03:07 PM
hi guys, i have some problem here.
I want to configure ipsec on the router. what I see on several websites, that crypto isakmp policy configuration is needed right? however, the configuration is not available on the router I'm using. or the configuration is only available on some types of routers?
I've tried to find it on google but can't find it.
Thank you so much for taking the time to answer this trivial question.
Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#crypto isakmp?
% Unrecognized command
Router(config)#
Solved! Go to Solution.
09-09-2021 04:36 PM
ah, in which case have you enable the securityk9 package:
! license boot module c2900 technology-package securityk9 !
cheers,
Seb.
09-09-2021 08:51 PM - edited 09-09-2021 08:54 PM
in your logs it clearly say it need a reboot
@handsome wrote:
Router(config)#license boot module c2900 technology-package securityk9
PLEASE READ THE FOLLOWING TERMS CAREFULLY. INSTALLING THE LICENSE OR
LICENSE KEY PROVIDED FOR ANY CISCO PRODUCT FEATURE OR USING SUCH
PRODUCT FEATURE CONSTITUTES YOUR FULL ACCEPTANCE OF THE FOLLOWING
TERMS. YOU MUST NOT PROCEED FURTHER IF YOU ARE NOT WILLING TO BE BOUND
BY ALL THE TERMS SET FORTH HEREIN.
ACCEPT? [yes/no]: yes
% use 'write' command to make license boot config take effect on next boot
%LICENSE-6-EULA_ACCEPTED: EULA for feature securityk9 1.0 has been accepted. UDI=CISCO2911/K9:FTX1524R5CE-; StoreIndex=0:Evaluation License Storage
Router(config)#: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = C2900 Next reboot level = securityk9 and License = securityk9
Router(config)#crypto i
Router(config)#crypto ?
key Long term key operations
Router(config)#crypto isakmp polic
Router(config)#crypto isakmp policy 1
^
% Invalid input detected at '^' marker.
Router(config)#
Here's the result sir, still not working...
! license boot module c2900 technology-package securityk9 !
copy run start
!
reload
your license will be added in the configuration file and it will be active after rebooting
once the router come online you can check issuing the command.
show license feature
09-09-2021 03:37 PM
Hi there,
What router and software image are you using?
cheers,
Seb.
09-09-2021 03:47 PM - edited 09-09-2021 03:48 PM
@Seb Rupik wrote:Hi there,
What router and software image are you using?
cheers,
Seb.
im using packet tracer 8.0.1 with 2 2911 routers
09-09-2021 04:36 PM
ah, in which case have you enable the securityk9 package:
! license boot module c2900 technology-package securityk9 !
cheers,
Seb.
09-09-2021 05:04 PM
Router(config)#license boot module c2900 technology-package securityk9
PLEASE READ THE FOLLOWING TERMS CAREFULLY. INSTALLING THE LICENSE OR
LICENSE KEY PROVIDED FOR ANY CISCO PRODUCT FEATURE OR USING SUCH
PRODUCT FEATURE CONSTITUTES YOUR FULL ACCEPTANCE OF THE FOLLOWING
TERMS. YOU MUST NOT PROCEED FURTHER IF YOU ARE NOT WILLING TO BE BOUND
BY ALL THE TERMS SET FORTH HEREIN.
Use of this product feature requires an additional license from Cisco,
together with an additional payment. You may use this product feature
on an evaluation basis, without payment to Cisco, for 60 days. Your use
of the product, including during the 60 day evaluation period, is
subject to the Cisco end user license agreement
http://www.cisco.com/en/US/docs/general/warranty/English/EU1KEN_.html
If you use the product feature beyond the 60 day evaluation period, you
must submit the appropriate payment to Cisco for the license. After the
60 day evaluation period, your use of the product feature will be
governed solely by the Cisco end user license agreement (link above),
together with any supplements relating to such product feature. The
above applies even if the evaluation license is not automatically
terminated and you do not receive any notice of the expiration of the
evaluation period. It is your responsibility to determine when the
evaluation period is complete and you are required to make payment to
Cisco for your use of the product feature beyond the evaluation period.
Your acceptance of this agreement for the software features on one
product shall be deemed your acceptance with respect to all such
software on all Cisco products you purchase which includes the same
software. (The foregoing notwithstanding, you must purchase a license
for each software feature you use past the 60 days evaluation period,
so that if you enable a software feature on 1000 devices, you must
purchase 1000 licenses for use past the 60 day evaluation period.)
Activation of the software command line interface will be evidence of
your acceptance of this agreement.
ACCEPT? [yes/no]: yes
% use 'write' command to make license boot config take effect on next boot
%LICENSE-6-EULA_ACCEPTED: EULA for feature securityk9 1.0 has been accepted. UDI=CISCO2911/K9:FTX1524R5CE-; StoreIndex=0:Evaluation License Storage
Router(config)#: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = C2900 Next reboot level = securityk9 and License = securityk9
Router(config)#crypto i
Router(config)#crypto ?
key Long term key operations
Router(config)#crypto isakmp polic
Router(config)#crypto isakmp policy 1
^
% Invalid input detected at '^' marker.
Router(config)#
Here's the result sir, still not working...
09-09-2021 08:51 PM - edited 09-09-2021 08:54 PM
in your logs it clearly say it need a reboot
@handsome wrote:
Router(config)#license boot module c2900 technology-package securityk9
PLEASE READ THE FOLLOWING TERMS CAREFULLY. INSTALLING THE LICENSE OR
LICENSE KEY PROVIDED FOR ANY CISCO PRODUCT FEATURE OR USING SUCH
PRODUCT FEATURE CONSTITUTES YOUR FULL ACCEPTANCE OF THE FOLLOWING
TERMS. YOU MUST NOT PROCEED FURTHER IF YOU ARE NOT WILLING TO BE BOUND
BY ALL THE TERMS SET FORTH HEREIN.
ACCEPT? [yes/no]: yes
% use 'write' command to make license boot config take effect on next boot
%LICENSE-6-EULA_ACCEPTED: EULA for feature securityk9 1.0 has been accepted. UDI=CISCO2911/K9:FTX1524R5CE-; StoreIndex=0:Evaluation License Storage
Router(config)#: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = C2900 Next reboot level = securityk9 and License = securityk9
Router(config)#crypto i
Router(config)#crypto ?
key Long term key operations
Router(config)#crypto isakmp polic
Router(config)#crypto isakmp policy 1
^
% Invalid input detected at '^' marker.
Router(config)#
Here's the result sir, still not working...
! license boot module c2900 technology-package securityk9 !
copy run start
!
reload
your license will be added in the configuration file and it will be active after rebooting
once the router come online you can check issuing the command.
show license feature
09-09-2021 10:59 PM
thank u so much sir, im sorry im new in cisco. but it works. thank u so much
09-09-2021 10:59 PM
thank u so much sir... it works.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: