How to configure Cisco ASA-SSM-CSC-10 module access to internet

Sotheng Se · ‎09-04-2014

Dear Support,

I want to configure ASA-SSM-CSC-10 module on Cisco ASA5510 can access to internet. Do you have guide to do it?

Below is the information of ASA-SSM-CSC-10 module and ASA5510 has Version 8.0(5)

ASA5510# sh module 1 details
Getting details from the Service Module, please wait...
ASA 5500 Series Content Security Services Module-10
Model:              ASA-SSM-CSC-10
Hardware version:   1.0
Serial Number:      JAF1229APDM
Firmware version:   1.0(11)4
Software version:   CSC SSM 6.6.1125.0.1145
MAC Address Range: 001d.70df.2f49 to 001d.70df.2f49
App. name:          CSC SSM
App. Status:        Up
App. Status Desc:   CSC SSM scan services are available
App. version:       6.6.1125.0.1145
Data plane Status: Up
Status:             Up
HTTP Service:       Up
HTTPS Service:      Up
Mail Service:       Up
FTP Service:       Up
Activated:          Yes
Mgmt IP addr:       10.10.1.241
Mgmt web port:      8443
Peer IP addr:       <not enabled>

Thanks

Regards,

nkarthikeyan · ‎09-05-2014

Hi,

Your CSC Module access network to update the software or remote access through the management port.... management port needs to be configured to allow csc to access the network..

Refer:

http://www.cisco.com/c/en/us/td/docs/security/asa/asa91/asdm71/firewall/asdm_71_firewall_config/modules_csc.html#97777

Regards

Karthik

Sotheng Se · ‎09-05-2014

Dear Support,

Link above that you provided me seem not meet my issue. could you please give me some configuration like management IP Address on both ASA and CSC-SSM or need to use NAT or use access-list to allow csc module can access internet?

thanks

Regards,