HOW TO USE ACS 5.2 CREATE A STATIC IP ADDRESS USER FOR REMOTE ACCESS VPN

[WANG23140552]

Hello everyone,

     I get problem.Please help me.

     At first I use ACS 4.2 to create static ip address user for remote access VPN,It's easy,just configuration it at user set>Client IP Address Assignment>Assign static IP address,but when I use ACS 5.2 I can't find it.

     I try to add IPv4 address attribute to user by read "ACS 5.2 user guide" ,it says this:

     Step 1Add a static IP attribute to internal user attribute dictionary:

     Step 2Select System Administration > Configuration > Dictionaries > Identity > Internal Users.

     Step 3Click Create.

     Step 4Add static IP attribute.

     Step 5Select Users and Identity Stores > Internal Identity Stores > Users.

     Step 6Click Create.

     Step 7Edit the static IP attribute of the user.

     I do this,but it's not work.When I use EasyVPN client to connect ASA 5520,user could through authentication but will not get that static IP address which I configoration on Internal Users.

     so,what should I do,if anyboby knows how to use ACS 5.2 to create a static ip address user for remote access VPN,please tell.

     Wait for you response,no matter right or not,please response,thank you.

[Herbert Baerten]

Hi Tuo,

I think you better ask this in the forum where the ACS experts are, since this does not seem to be a problem on the ASA side.

hth

Herbert

[WANG23140552]

I greatly appreciate your help, the problem has been the perfect solution. Thanks for your reply.