IKEv2 Commands - Emulator/Simulator

[Mitch_246]

Wanting to do a few routing labs and found that no routers on GNS3 or Packet Tracer show 'crypto ikev2...' commands, even after booting securityk9 license (Packet Tracer). GNS doesn't even have 'show license detail' command at all for any IOS images I'm using.

Does Cisco VIRL, or Packet Tracer have any routers that allow for the booting of the securityk9 license and display IKEv2 commands and associated sub commands such as:

crypto ikev2 keyring

crypto ikev2 proposal

crypto ikev2 policy

crypto ikev2 profile

I'm under the assumption I'm either missing something incredibly obvious, or that this is only achievable with a physical device with the appropriate licenses ordered from Cisco.....

[ammahend]

I know it works in EveNG Community edition, which is free,you can try that

[Karsten Iwen]

I don't know about Packet Tracer, but VIRL/CML can do this. Or, if you can download the virtual CSR1000v (Cloud Services Router), that one can also do IKEv2.