cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
352
Views
0
Helpful
1
Replies

IOS 7 SNMP MIB-IPSEC

thibaut.leduc
Level 1
Level 1

Hi,

After to have install IOS 7 on my PIX ; I do Monitoring in SNMP and I tested ... I don't see any info about my IPSec Tunnels...however in the datasheet, it's OK !!! it is written that MIB-IPSEC is now OK for PIX...

1 Reply 1

b.speltz
Level 4
Level 4

Check if the SNMP manager, that is your NMS has the MIB installed. Even if the PIX has the MIB installed, even the NMS should support the MIB. If it is not previuosly installed you can install the MIB and then compile and try monitoring..It will work this way.