IP LOCAL Pool lease time/recycle delay ANYCONNECT Session

[jewfcb001]

Hi All,

I have some question about Lease time for IP Local Pool for release to Client . If We need to configure time for release IP Pool for client 

How can I do ? 

I use ASA5585-SSP-10 and running Version 9.1(6)

Thank you 

Sutiranan Phooton 

[Rolando Valenzuela]

This is what you are looking for: http://www.cisco.com/c/en/us/td/docs/security/asa/asa90/configuration/guide/asa_90_cli_config/basic_dhcp.html#45286

I have a /24 pool for anyconnect and I dont have problem with the default values for lease and all that... if I'm not wrong the default is 24h before the address is recycled

Rolando A. Valenzuela.

[jewfcb001]

Hi Rolando

Thank you for answer . I mean IP Pool for SSL VPN Anyconnect client , I'm not sure about configuration . Can I Configure or not ?  How will i do? 

Sutiranan Phooton

[mbilgrav]

FW-1/pri/actNoFailover(config)# vpn-addr-assign local reuse-delay ?

configure mode commands/options:
<0-480> IP address reuse delay in minutes