IPSec Tunnel

[godlam]

I have a problem on ipsec tunnel. I have a host with fixed public IP and two or more remote host. There is worked fine between remote and host. But I got the problem on remote to remote using host as gateway. It did not work. Do you have any comments? Please advice.

R2-------------R1-------------R3

R1=Host, R2,R3=Remote

R2 cannot ping with R3. R1 can ping R2 and R3.

Regards

Godwin

[awaheed]

Hi Godwin,

Not exactly sure on what you are trying to achieve here. Can you kindly comment on which two devices have the VPN IPSec tunnel between each other?

Regards,

Aamir

[godlam]

The story are we have one Cisco 1710 and two Linksys BEFVP41. I am using the ipsec to connect to central Cisco 1710. I want to archive that 1710 acts as a HUB and Linksys can communicate with another side of LinkSys. There is my point. Now, I can connect to central only. I cannot communicate with the other side of LinkSys.

Cisco Network is 10.2.0.0/24

LinkSys1 Network is 10.2.1.0/24

LinkSys2 Network is 10.2.2.0/24

I have set the remote is 10.2.0.0/16 and local is 10.2.1.0/24 on the LinkSys1 and LinkSys2 is remote 10.2.0.0/16 and local is 10.2.2.0/24.

Please advice. Thanks

Regards

Godwin