07-15-2019 11:51 PM - edited 02-21-2020 09:42 PM
Hello,
I have setup IPSec VPN on cisco 1841 router. I am facing a problem that is after day 1/2 router stops sending the traffic in VPN tunnel which resolves after rebooting the router. Kindly suggest me the permanent solution.
Thank you
07-16-2019 05:30 AM
Is this is a site to site or a Remote access vpn? When the issue happens take the following output from the router?
show crypto ipsec sa
show crypto session detail
Run the following debugs as well:
debug crypto isakmp
debug crypto ipsec
07-16-2019 09:42 AM
hello
Please check if the lifetimes are configured properly on the router. The Isakmp lifetime should be greater than the Ipsec (in secs) by default its 86400 and 3600 respectively.
please make sure the lifetime in KB's in set to unlimited and make sure it is set to unlimited.
Also, make sure lifetimes on the devices on each end have the same settings and not different ( n secs or Kbs).
Regards
Shikha Grover
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide