cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
592
Views
0
Helpful
4
Replies

IPSEC VPN

michiganheart
Level 1
Level 1

I have a remote site that is connected via a site to site vpn tunnel to a pix 515. The remote site has a 1721 through a DSL router. Everything was fine until I added a cisco 831 cable modem router to the mix. Both tunnels use the same dynamic crypto map on the pix, now the dsl will go down and then the cable will go down and both require reboot to come back up. Any ideas?

4 Replies 4

lbradshaw
Level 1
Level 1

please enable logging on the 515 and look at the logs..Or send the logs.

if i only get one guess, "What is the scope of the VPN connection"?

Lee

I will enable the logs, but what do you mean "what is the scope of the vpn connection"?

abhijitht
Level 1
Level 1

I have a Adsl Router 837 without static ip . Can i use any of the DDNS support sites to make like a static and can i use it for vpn access of my network from internet ?

If i can how many users can use it simultaneouesly ?

CoetzerJ
Level 1
Level 1

Need to do something similar, ie PIX515 at main office and a branch office using a SOHO 97 ADSL Router. Need a Site to Site VPN between them, only problem is the ADSL Changes its IP address?

Any Configuration examples? PIX and ADSL Side?