Hello:-
i installed Any-connect vpn on my Cisco 2951, After installation Any-connect license show me evaluation version. see the details below.
Do i need separate license for any connect? if anyone have experience please let me know.
Thanks a lot
Router IOS
c2951-universalk9-mz.SPA.152-2.T1.bin
Router details:-
Cisco CISCO2951/K9 (revision 1.0) with 485376K/38912K bytes of memory.
Processor board ID FHK1350F29P
4 FastEthernet interfaces
3 Gigabit Ethernet interfaces
1 terminal line
1 Virtual Private Network (VPN) Module
DRAM configuration is 72 bits wide with parity enabled.
255K bytes of non-volatile configuration memory.
254464K bytes of ATA System CompactFlash 0 (Read/Write)
License Info:
License UDI:
-------------------------------------------------
Device# PID SN
-------------------------------------------------
*0 CISCO2951/K9
Technology Package License Information for Module:'c2951'
-----------------------------------------------------------------
Technology Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------
ipbase ipbasek9 Permanent ipbasek9
security securityk9 Permanent securityk9
uc None None None
data None None None
Configuration register is 0x2102
Show license:-
StoreIndex: 4 Feature: SSL_VPN Version: 1.0
License Type: EvalRightToUse
License State: Active, In Use
Evaluation total period: 8 weeks 4 days
Evaluation period left: 7 weeks 0 day
Period used: 1 week 3 days
Transition date: Dec 24 2014 23:28:00
Lock type: Non Node locked
Vendor info: <UDI><PID>NOTLOCKED</PID><SN>NOTLOCKED</SN></UDI><T>RTU</T>
License Addition: Additive
License Generation version: 0x8200000
License Count: 150/0 (In-use/Violation)
License Priority: Low
