Lan-To-Lan VPN with multiple networks

[Robert.perez]

Hi,

I currently have a hub-and-spoke VPN configuration with 6 ASA 5505's at remote sites all connected to an ASA 5510 at HQ via IPSEC lan-to-lan tunnels. My current configuration allows hosts on the remote site networks to talk to hosts on the HQ network, but not to hosts on the other remote sites.

I have receieved a request to allow comminucation between the remote sites as well, with traffic all routed through the 5510 at HQ.

What would be the best way to go about this?  Pointers to configuration examples would be of great help as well.

Thanks!

[Jennifer Halim]

Here is a sample configuration:

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00804675ac.shtml

Hope this helps.