Hi Experts
i am trying to configure IKEv1 ipsec tunnel between Cisco ASA 9.6(4)8 and openswan linux machine in AWS but unable to get the phase-1 up. below is the config of openswan. could you please suggest whats going wrong
=====openswan config=========
conn host-to-host-tunnel1
#General connection config
type=tunnel
authby=secret
auto=start
#dpddelay=2s
#dpdtimeout=10s
#dpdaction=restart
rekey=yes
keyingtries=%forever
#Network/Routing config: Host Side
left=34.249.27.133
leftnexthop=%defaultroute
leftsubnet=10.40.17.0/24
#Network/Routing config: Remote side
right=81.144.222.74
rightnexthop=%defaultroute
rightsubnets=10.255.193.144/28
#Phase-1 Config
keyexchange=ikev1
ike=aes256-sha1;modp1024
ikelifetime=28800s
#Phase-2 Config
auth=esp
esp=aes256-sha1
pfs=no
compress=no
keylife=3600s