My set up so far:
- Host: macOS Big Sur
- Hypervisor: VMWare Fusion 12.1.0
- Guest: Ubuntu 20.04.1
- VPN Client: Cisco AnyConnect 4.9.04053
- VM Connectivity without VPN on host: yes
- VM connectivity with VPN on host: for IPV4 only. Does not work for IPV6
Please someone help me figure this out for IPV6 with VPN connected on host!
I followed the instructions on https://kb.vmware.com/s/article/80793 to set up a network interface.
- Set up static IP for VPN free connection
- Turn off VPN
- Settings -> Network -> Wired -> Cog icon -> IPv4
- Manual
- Adresses
- Adress: 192.168.83.128 - Static IP
- Netmask: 255.255.255.0
- Gateway: 192.168.83.1
- Even Gateway: 192.168.83.0 works - vmnet3 (The new network interface)’s subnet IP
- DNS
- 192.168.83.0
- 8.8.8.8
- 8.8.4.4
- 1.1.1.1
- Leave IPV6 as automatic and leave the defaults be
- Set up static IP for VPN connection in another wired network profile
- Adresses
- Adress: 192.168.83.128 - Static IP
- Netmask: 255.255.255.0
- Gateway: <VPN-> Statistics-> Address information -> Client (IPV4) value>
- DNS
- 192.168.83.0
- 8.8.8.8
- 8.8.4.4
- 1.1.1.1
- IPV6? I used to be able to see the IPV6 client on the AnyConnect statistics window. It is showing as not available now. I tried setting a static IPV6 address but I don't know how to provide a gateway with this custom network interface and AnyConnect not showing IPV6 client. How do I configure this? I understand I have to update the gateways every time Cisco resets the session. I'll live. I want it to just work ATM. Any help or pointers are appreciated.