Logging Firewall over VPN

[adamfilkins]

Hello,

I am looking to log our firewall at a remote location, coming in over VPN, to our datacenter. I am having trouble as the firewall is not set to send the logs out the public interface. Is there a way to complete this? Any help would be appreciated.

Thanks,

Adam Filkins

[a.kiprawih]

Hi,

The "management-access" command is probably what you'r elooking at, as it is used to support the following access through an IPSec VPN tunnel:

•SNMP polls to the mgmt_if

•HTTPS requests to the mgmt_if

•ASDM access to the mgmt_if

•Telnet access to the mgmt_if

•SSH access to the mgmt_if

•Ping to the mgmt_if

•Syslog polls to the mgmt_if --> try this

•NTP requests the mgmt_if

http://www.cisco.com/univercd/cc/td/doc/product/multisec/asa_sw/v_70/cref_txt/mr.htm#wp1578189

Rgds,

AK

[adamfilkins]

Tried this and it seems to be letting me run the command, but still doesn't seem to be logging anything to my KIWI syslog. Let me know if you have any other info that might do me some good on this, because I am about tapped out as far as knowledge in this area. THANK YOU FOR YOUR HELP!!!

Adam