Management VPN Tunnel Pre-Deploy MSI and Profile

[sdfgdfgfddfdfgdf]

Does anyone know where the profile should be located for this?

We currently have a 'Profiles' folder in the same location as the .msi installation package.

Within that folder there is a 'vpn' folder which contains our regular profile containing server URLs, etc.

I need to know where to put the profile for the Management VPN Tunnel if anyone could kindly assist?

I tried taking the VpnMgmtTunProfile.xml file from an existing install, dropping this onto an existing client install works fine albeit after a reboot to fetch it into the AnyConnect app.VPN and AnyConnect

But putting this in the Profile/vpn/ folder with our other profile, seems to prevent both of them from being installed with the app.

[Josue Brenes]

Hi,

The location for the VpnMgmtTunProfile.xml profile is under: C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile\MgmtTun.

Keep in mind that the usage is different from the one used normally for Anyconnect, when creating the tunnel management vpn profile on the ASDM, choose "AnyConnect Management VPN Profile" as the profile usage.

Link for reference:
https://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect47/administration/guide/b_AnyConnect_Administrator_Guide_4-7/configure-vpn.html#id_82459

Rate if it helps.
Regards,
Josue Brenes
TAC - VPN Engineer.