Monitor the bandwidth utilization of IPSec VPN tunnel
I have multiple IPsec VPN tunnels created in CISCO 3845 rotuer. would like to monitor the bandwidth utilization of individual IPSec tunnel. Can someone give the OID value to monitor them in MRTG or PRTG ?.
Do you use VTI interfaces or plain old lan-2-lan configuration syntax? If first, seems it is easy task, just find your tunnel interface index (snmpwalk will help) and monitor it like any other interface. If second then move to VTI interfaces and do as above.
This article is intended to be a simple example of configuring AnyConnect relevant syslog messages to be sent from the ASA to a Syslog server. The syslog server in this example is Spunk but almost any syslog server should be do the job. The ...
NGFW Spring 2020 Releases
It’s official! FTD 6.6, ASA 9.14.1, and FXOS 2.8 have been released. We want to thank the hundreds of team members for the tens of thousands of man-hours dedicated to driving this critical release over the finish line. 120...
Hi,I was trying to 2fa cisco duo , all the required settings done as per below . The problem is duo cloud does nti not getting any request from the asa . So I am not getting any code from the duo https://www.youtube.com/watch?v=6nEvmc8wji...
This event continues the conversation of our recent Community Ask Me Anything event "Secure Remote Workers".
To participate in this event, please use the button to ask your questions
Here’s your ch...
User Experience Enhancements
As part of the Cisco Common User Experience program, we are working towards a more uniform user experience and terminology alignment. This program runs across all Cisco security products.
Early Access introduces a...