Nat over IPSEC tunnel on cisco router

[jmp780718]

Hi.

I have one central router working like a Hup with two spoke Routers but the spokes routers has the same network encryption domain (same Lan Segment), i need to do a nat over one of the VPN tunnels avoid conflicts in the hub router. Can someone help me?.


Sent from Cisco Technical Support iPad App

[Marcin Latosiewicz · Accepted solution]

NAT is performed before encryption and before decryption so you should be able to configure your NAT as you please.

Example:

http://www.cisco.com/en/US/products/ps5855/products_configuration_example09186a0080a0ece4.shtml