01-31-2012 06:41 PM
I have a TS gateway and TS server (2008 R2 for both) sitting behind a Cisco 1841 router. Both have internal IP's. I bought and installed the SSL certificate with the vendors help on the gateway. Internally it works fine: I RDP through the gateway to the TS server.
I am unable to connect from the external WAN client. I'm assuming that it is because the gateway server is not visible on the router's WAN interface (of course). What do I need to do to get the connection to the gateway so that I can get to the TS server? I'm thinking that the router needs further configuration. Also, the test router is vanilla (nothing but basic WAN and LAN config - No firewall, etc., config yet).
Basically, I'll be presenting applications from the TS server behind the router. Any help is greatly appreciated.
01-31-2012 07:14 PM
Hi,
Have you configured NAT on the router to allow connections on public ip/port to Internal server ip/port? Check this link for sample config...
http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080094e77.shtml
hth
MS
02-02-2012 07:07 AM
I'll check this out to see if my configuration is off, which I believe it is.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide