I'm new to cfg/using VPN. I have a 3002 that I cannot get to bring up a tunnel using PPPoE. The private interface is up but the public keeps saying "Waiting for PPPoE".
When I try to connect VPN (VPN 3002 connection status) I get the errors in the logfile. What should I check. Thanks in advance.
========================================
1 11/11/2005 16:31:51.390 SEV=4 AUTH/29 RPT=1
Management user admin disconnected: duration 0:01:14
2 11/11/2005 16:34:23.690 SEV=4 HTTP/50 RPT=1 10.3.144.74
HTTP 404 Not Found (/)
3 11/11/2005 16:34:28.360 SEV=5 HTTP/10 RPT=6 10.3.144.74
HTTP 401 Unauthorized: Authorization Not Present
4 11/11/2005 16:34:28.360 SEV=5 AUTH/36 RPT=3 10.3.144.74
User [ admin ] Protocol [ HTTP ] attempted ADMIN logon.
Status: <ACCESS GRANTED>
5 11/11/2005 16:34:28.360 SEV=4 AUTH/83 RPT=3
User [admin] connected
A
6 11/11/2005 16:34:28.360 SEV=4 HTTP/47 RPT=3 10.3.144.74
New administrator login: admin.
