VPN

I have a router that is within a private network. I have a registered address taht I can advertise to the Internet and require to set up an IP-Sec connection to this device.THe problem I have is that when ISAKMP negotiates it uses the WAN link Ip add...

I have a adsl router connected to a switch connected to a number of servers.I want to use the PIX as a VPN server put paralel on the network and use only the inside interface.When I connect to VPN on the internal network all works fine, when connecte...

I want to make remote access to my LAN from home and i need to configure my router to do that but without using server for Authentication, all i need is to define the users profiles on the router only. is it possible? and if so wat is the configurati...

Hi,I’m having trouble with RRI into VRF.I get the reverse route in the global routing table but not in the VRF table.The remote pix are using dhcp on the outside int.Both the isakmp and the ipsec comes upp. My config are:version 12.2!hostname VPNTERM...

hi alli have an H.O with 1841 router and 515E pix with Static public IP addresses from ISP.so i can use it for my router and pix.i have 5 branch offices.with ADSL connection, i'm going to use 877 router for that, for this i will not get a Static publ...

Hi all,Is it possible to install 2 different software vpn client on a pc? Any feedback greatly appreciated. Thanks.

Hi, i can establish a VPN connection to my pix through cisco vpn client and microsofts vpn client. When conncted, i can browse the network with the cisco client, but cant when with microsoft vpn. Am i missing any configuration?My friend also has same...

hello,I have a router 837 for Internet Access and i have configure VPN access to centrale Office.This configuration is working well.Here is the configuration attach (the public IP address is not the real).The problem :I must give access to an intern...

We have a local MAN that is semi public but no access to the Internet. We want to have everything from Site B to go to Site A.

Hello everyone,My router as an serial interface wich is configured with x25 encapsulation without address and a tty dial in line wich should allow for pad access and protocol translation. The problem is that the router consider that all transactions...

I am having an office which Head Office having Cisco 2811 which IPBASE IOS and Remote Station (Salesman's Home) with an ADSL router and i would like to configure a Dynamic VPN tunnel so that he can be connecting from his home to share information and...

Hi, can someone please help. I have just installed Cisco VPN Client 4.0.3 on my PC which is running XP SP2 with a Sygate Personal Firewall Pro V5.something and Norton ( Windows firewall is switched off ) I have a broadband connection.I can start the ...

I am new to CCNA could any one help me out to get CCNA certifaction model questions.Thanks in Advance Paul