12-08-2020 01:17 AM - edited 12-08-2020 06:52 AM
Dear Community,
I have an issue with reaching networks connected to my core switch through the remote vpn connection of remote user(please see topology attached). The vpn configuration is on the dc firewall and nating for "internet" done on the perimeter firewall.
How come I can reach networks(192.168.1.0/24) connected on the dc firewall but not the core switch(192.168.100.0/24)? Please assist. Thanks
Solved! Go to Solution.
12-13-2020 01:53 AM
Can't access 192.168.1.0/24 from where? When connected to the VPN or from the core switch? How exactly are you testing, from which source IP to which destination IP?
12-13-2020 02:13 AM
12-13-2020 02:23 AM
Good to hear.
Not unencrypted, but untrusted. You are essentially allowing the internet to route through the perimeter firewall, through the core switch to the outside interface of the DC firewall to terminate the RAVPN. Yes, it's encrypted but still not a good idea, normally you'd terminate a VPN on the perimeter of the network.
Re-configure the Perimeter firewall to run RAVPN, just use the DC firewall to firewall traffic inside the network.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide