normal output from VPN 3002?

[marshall.blanco]

I have a remote access vpn tunnel established through a 3002 hardware client. Everthing is working fine for the most part. It's only at sporadic times that the remote users application will time out, maybe due to network connectivity.

Looking at the syslogs from the 3002 it is constantly returning these messaages...

Is this normal, or does it seem like there may be an issue?

2008-09-04 14:30:03 Local7.Debug 10.0.0.1 1570: 2008 Sep 04 14:29:57.790 EDT -4:00 %IPSECDBG-7-18: RPT=190: 24.28.48.42: Xmit IPSEC-over-UDP NAT keepalive packet: success

2008-09-04 14:30:04 Local7.Debug 10.0.0.1 1571: 2008 Sep 04 14:29:59.850 EDT -4:00 %IKEDBG-7-0: RPT=777: 24.28.48.42: Group [24.28.48.42] sending notify message

2008-09-04 14:30:04 Local7.Debug 10.0.0.1 1572: 2008 Sep 04 14:29:59.850 EDT -4:00 %IKEDBG-7-0: RPT=778: 24.28.48.42: Group [24.28.48.42] constructing blank hash

2008-09-04 14:30:04 Local7.Debug 10.0.0.1 1573: 2008 Sep 04 14:29:59.850 EDT -4:00 %IKEDBG-7-0: RPT=779: 24.28.48.42: Group [24.28.48.42] constructing qm hash

2008-09-04 14:30:04 Local7.Debug 10.0.0.1 1574: 2008 Sep 04 14:29:59.850 EDT -4:00 %IKEDBG-7-0: RPT=780: 24.28.48.42: SENDING Message (msgid=d6ad7f80) with payloads : HDR + HASH (8) + NOTIFY (11) total length : 80

[JORGE RODRIGUEZ]

This is normal, BTW you have login in Local severity 7 which is debugging meaning you will literally see almost every single traffic at this login level, you may want to change that level to informational, debugging is helpful when troubleshooting but not necessary under normal operations.

Rgds

Jorge