cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
715
Views
0
Helpful
1
Replies

only ping one way

shellfishtech
Level 1
Level 1

I have a site-to-site VPN with IP schemes of Location E 192.168.100.x and Location W 192.168.101.x - a third party vendor is requiring/requesting ping for their VOIP system. I can ping from Location W to Location E but not vice versa. I can ping the router inside interface (192.168.101.254 I believe) but not any of the hosts on the inside. Please help. I've checked all my ICMP references and they are as follows:

match protocol icmp

policy-map type inspect sdm-permit-icmpreply

class type inspect sdm-cls-icmp-access

  inspect

class class-default

  pass

class type inspect sdm-cls-icmp-access

policy-map type inspect sdm-permit
class type inspect sdm-cls-icmp-access
  inspect
zone-pair security sdm-zp-self-out source self destination out-zone
service-policy type inspect sdm-permit-icmpreply

1 Reply 1

Asim Malik
Level 1
Level 1

Hi,

A few quick tests. Can you try disabling cef and see if that makes any difference. using an acl on private interface with log keyword that matches the traffic will make the  packets bypass cef.  Do you see any drops in the log. Also will you be able to disable  Zone based firewall and test ?