09-22-2005 10:22 PM
I have a pat for users accessing internet. I want to do a static nat for internal web server and that this server to be seen by internal users as domain name. Can you help me about this.
I have done a:
static(outside,inside) 193.56.33.22 192.168.1.1 dns netmask 255.255.255.255 0 0
But I can see web server from inside but I cannot see it from outside.
thanks
09-23-2005 02:55 AM
depends on how many public ip you've got.
if only one,
static (outside,inside) tcp
if there are more than one
static (outside,inside)
for accessing the web server from the internet, inbound acl is also required.
access-list 111 permit tcp any
access-group 111 in interface outside
09-23-2005 03:28 AM
I have one public ip address. But I want to see this web server from inside too with a domain too. Is it is possible with your static command ?
thnx
09-24-2005 03:48 AM
keep the static command and do "alias (inside)
for reference,
09-27-2005 01:49 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide