Hi,
We have TACACS enabled in our routers. I wanted to restrict user access to only particular commands. I am providing those commands below.
Router#term len 0
Router#sh clock
Router#sh ip int br
Router#sh env all
Router#sh int s0/0
Router#sh int s0/1
Router#ping 10.30.250.137
Router#conf t
Router(config)#int se0/0
Router(config-if)#no backup int br0/0
Router#exit
Router#isdn call int bri 0/0 22861600
Router#sh isdn a
Router#sh isdn status
Router(config)#int se0/0
Router(config-if)#backup int bri0/0
Router#sh int bri0/0
Router#sh run
Nothing more than these commands should be allowed for configuration. Can someone advice me for required configuration in Router as well as cisco ACS.
Regards
SKRAO