I have a VPN setup between a PIX 515E and PIX 515. THe gateway router has 2 interfaces going out. One is a data T1 (which all traffic is going to) and the other is a PTP T1 coming from my site. I was wondering how to send traffic across that interface instead of the data. I am trying to seperate the VPN traffic from the normal internet traffic. I entered the following thinking this would work.
route outside (ip of PIX515 External Interface and subnet) (PTP T1 interface on the gateway router)
The only way I have been able to test it is disablign the orignal interface on the gateway router and seeing if the tunnel is up which it has not been. If you have any ideas let me know.
THanks
Tripp
