Possible to script VPN OnConnect to map drives on a Mac client?

[jeggleston]

We need a script OnConnect for a VPN based on group membership. The script will run when the connection is made and it will map 2 Network (Windows Shares) drives for the GM's MAC Laptop.

I have never built a script for a windows client let alone a mac client.  Can anyone point me to some good documentation?

I have found a few on doing this with windows clients, but not with a mac.  Also, I am not a Mac Admin, and have very limited access to a Mac.

Thank you.

[Rob Ingram]

Hi @jeggleston 

Why not get the Mac Admins to write the script for you? not really a network engineers job to do (in my experience).

The script doesn't need to be written in a specific language, but the client must be able to run the script. On MacOS the script must be located /opt/cisco/anyconnect/script

Reference, page 63

https://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect49/administration/guide/b_AnyConnect_Administrator_Guide_4-9.pdf

[jeggleston]

Thanks Rob. We are a 3 person shop, with no "Mac Admins". Thank you for the link.